Solutions That Save. Lives.
In Fire Safety, Perimeter is the only full-service solutions provider offering products, equipment, personnel, logistics and service. Perimeter Solutions operates as the largest global producer of fire-fighting chemicals with a broad product offering across fire retardant and firefighting foam applications. Perimeter is a key supplier of wildland fire fighting products and services to the USDA Forest Service, CalFire and other large fire management agencies across the world. Our retardant and Class A foam products are fully qualified by the USDA Forest Service. We produce major brands known throughout the world like
PHOS-CHEK® and FIRE-TROL® retardant, foam and gel products; AUXQUIMIA® firefighting foam products, SOLBERG® fluorine-free foam products.
SOLBERG FIRE FIGHTING FOAM
Click on the tabs below to view more information on the different products . . . .
Bushfire Fighting Foam
Solberg Fire-Brake™ 3150A is a proven Class A foam that has been used
on some of the worst Australian wildfires in the past two decades.
Solberg Fire-Brake™ 3150A works 4 ways
Solberg Fire-Brake™ 3150A is a dense, thick foam and acts just
like a blanket on the fire.
1. Excludes oxygen and smothers the fire.
2. It can stop Class A fuel from getting dangerously hot as the foam
absorbs radiant heat.
3. The foam helps cool the fire by releasing trapped water gradually.
4. Easy visibility – you can see the white Solberg Fire-Brake™ 3150A
foam from the air and during a ground attack. This helps when
you’re making a continuous firebreak.
Solberg Fire-Brake™ 3150A is an effective water management
tool. Solberg Fire-Brake™ 3150A foam concentrate can expand
the volume of water at least ten times.
Class B Flammable Liquid
Class A Combustible Solids
6% Flammable Liquids
1% Combustible Solids
NEXT GENERATION SOLBERG FOAM TECHNOLOGY
Solberg is proud to release its next generation of Solberg Foam
Technology – the new Solberg RF Series of foam concentrates.
The new Solberg RF Series of fire fighting foams use an advanced
extinguishing mechanism that is highly effective against even the
most difficult flammable challenges.
Best of all, the new generation Solberg RF Series of foam concentrates
do not contain Fluorosurfactants, Fluoropolymers or Fluorotelomers.
New Technology, Traditional Performance
RF6 can be applied with all existing equipment. When proportioned
at 6% concentration with water of all kinds it has the ability to flow
quickly and freely across the surface of hydrocarbon flammable liquid
fuel. Fire control and extinguishment is rapid and effective.
Class B Flammable Liquid
Class A Combustible Solids
6% Alcohols/Polar Solvents
3% Hydrocarbons
1% Combustible Solids
NEXT GENERATION SOLBERG FOAM TECHNOLOGY
Solberg is proud to release its next generation of Solberg Foam
Technology – the new Solberg RF Series of foam concentrates.
The new Solberg RF Series of fire fighting foams use an advanced
extinguishing mechanism that is highly effective against even the
most difficult flammable challenges.
Best of all, the new generation Solberg RF Series of foam concentrates
do not contain Fluorosurfactants, Fluoropolymers or Fluorotelomers.
New Technology, Traditional Performance
RF 3×6 ATC can be applied with all existing equipment. When proportioned
at 3% for hydrocarbon fuels and 6% for polar fuels, it has the ability
to flow quickly and freely across the surface of a flammable liquid fire.
Fire control and extinguishment is rapid and effective.
Class B Flammable Liquid
Class A Combustible Solids
3% Flammable Liquids
1% Combustible Solids
NEXT GENERATION SOLBERG FOAM TECHNOLOGY
Solberg is proud to release its next generation of Solberg Foam
Technology – the new Solberg RF Series of foam concentrates.
The new Solberg RF Series of fire fighting foams use an advanced
extinguishing mechanism that is highly effective against even the
most difficult flammable challenges.
Best of all, the new generation Solberg RF Series of foam concentrates
do not contain Fluorosurfactants, Fluoropolymers or Fluorotelomers.
New Technology, Traditional Performance
RF3 can be applied with all existing equipment. When proportioned
at 3% concentration with water of all kinds it has the ability to flow
quickly and freely across the surface of hydrocarbon flammable liquid
fuel. Fire control and extinguishment is rapid and effective.
1%
FLUORINE FREE
CLASS A/B FOAM CONCENTRATE
The first certified fluorine free Class A/B firefighting foam, PHOS-CHEK®
1% fluorine free foam concentrate is a mixture of water and hydrocarbon
surfactants. Developed for use on Class B hydrocarbon fuel fires,
this organohalogen free foam is an environmentally responsible next
generation product, that demonstrates Perimeter Solutions’ commitment
to superior firefighting performance and environmental responsibility.
PHOS-CHEK 1% fluorine free foam is designed for rapid control and
knockdown in both gentle and forceful applications on hydrocarbon
fuel fires. Use of fluorine free foam is an option for spill fires and are
typically used in lower hazard fire scenarios. PHOS-CHEK 1% fluorine
free foam is an extremely effective wetting agent for use on Class A
fires involving ordinary combustible materials such as wood, cloth,
paper, rubber and many plastics.
SOLBERG® AVIGARD™ Fluorine-Free Foam Concentrates are a state-of-the-art
fluorine-free, low viscosity aviation foam technology designed for extinguishing
and securing flammable aviation fuel spills and fires (Jet A and Jet A1). A special
combination of hydrocarbon surfactants and additives delivers excellent foaming,
extinguishment and burnback properties to firefighting foams using either fresh
water or sea water. SOLBERG AVIGARD foam concentrates contain no added PFAS
chemicals and can be considered as readily and rapidly biodegradable.
SOLBERG® VERSAGARD™ AS-100 multipurpose 3×3 fluorine-free foam concentrate is a state-of-the-art alcohol-resistant, fluorine-free pseudoplastic foam technology, with no intentionally added PFAS chemicals, designed for extinguishing and securing both Class B (hydrocarbon fuel and polar solvent fuel) and deep-seated Class A fires. This fluorine-free foam concentrate is a combination of hydrocarbon surfactants and additives delivering excellent foaming, vapour sealing, extinguishment and burnback properties for attacking and securing both shallow and fuel in-depth fires, using fresh, sea or brackish water. Some fluorine-free foams are viscous and often show viscosity increase in contact with water. SOLBERG VERSAGARD AS-100 creates very stable foams with similar viscosity to traditional AR-AFFF foams. This significantly improves storage, handling and long-term stability.
SOLBERG®
DoD 3155
TRAINING FOAM CONCENTRATE
DESCRIPTION
SOLBERG® DoD 3155 is an economical training foam product for cold and hot training exercises. The product is a super concentrate that must be diluted by adding 1 litre to 19 litres of water, then proportionate the mixture at 6% through air-aspirated or non air-aspirated equipment. The resulting foam can be used for cold training exercises to allow crews to become familiar with their equipment and have minimal environmental impact. In addition, the foam can be used for hot training exercises on hydrocarbon, non-water miscible fuels.
APPLICATIONS
Originally designed for use on Department of Defence fire training grounds, SOLBERG DoD 3155 is a unique training tool that is used to assist trainee fire fighters to become familiar with flammable liquid fire fighting scenarios. Whether the facility utilises LPG simulators, or controlled flammable liquid props, DoD 3155 foam solution will allow familiarisation with foam generation equipment that will give fire fighters confidence and learn the appropriate use of hand held nozzles and even fire fighting appliances. Whether the scenario is shipboard, aircraft crash rescue or battleground, this foam concentrate is an appropriate training tool. This product is also suitable for civil aviation, fire brigade and maritime training schools.
USE INSTRUCTIONS
To prepare the training foam mixture, it is recommended that an old fire fighting foam 20 litre pail be used to prepare the solution. First fill the 20 litre pail with approximately 19 litres of water. Add 1 litre of the Training Foam super concentrate to the water. Stir, tumble or shake the mixture to ensure optimal dispersion of the superconcentrate in the water. Then apply this mixture at 6% with water through a foam proportioning system. Additional DoD 3155 can be added to adjust performance if required, depending fire equipment design and desired visual effect. In addition, 3% training foam mixtures can also be prepared through the higher measures of DoD 3155 foam concentrate.
Available Options
20L pails, 200L drums, 1,000L IBCs
For more videos, visit: https://vimeo.com/solbergfoam