NEXT GENERATION SOLBERG FOAM TECHNOLOGY Solberg is proud to release its next generation of Solberg Foam Technology – the new Solberg RF Series of foam concentrates. The new Solberg RF Series of fire fighting foams use an advanced extinguishing mechanism that is highly effective against even the most difficult flammable challenges. Best of all, the new generation Solberg RF Series of foam concentrates do not contain Fluorosurfactants, Fluoropolymers or Fluorotelomers. New Technology, Traditional Performance RF3 can be applied with all existing equipment. When proportioned at 3% concentration with water of all kinds it has the ability to flow quickly and freely across the surface of hydrocarbon flammable liquid fuel. Fire control and extinguishment is rapid and effective.

SOLBERG® RE‑HEALING™ RF3 foam concentrate from SOLBERG is an innovative environmentally sustainable fluorosurfactant and fluoropolymer-free foam concentrate used to effectively extinguish Class B hydrocarbon fuel fires. Proportioned at 3% solution, SOLBERG RE‑HEALING RF3 foam concentrate can be used in fresh, salt or brackish water. SOLBERG RE‑HEALING RF3 foam possesses excellent burn back resistance due to its remarkable flow and rapid resealing characteristics. SOLBERG RE‑HEALING foam concentrates are formulated using a new high performance synthetic foam technology to replace traditional AFFF, FFFP foam concentrates and older protein and fluoroprotein foams. RE-HEALING RF3 foam concentrate contains no sediments.

SOLBERG RE‑HEALING RF3 foam concentrate
is intended for use on Class B hydrocarbon fuel fires. It is not intended for use on Class B polar solvent fuels. The foam can be used to prevent re-ignition of a liquid spill and control hazardous vapors. On Class A fuels, SOLBERG RE‑HEALING RF3 foam will improve extinguishment in deep-seated fires. Foam discharge devices such as air aspirating, as well as, non-air aspirating equipment, including standard fire sprinkler heads, can be used to obtain maximum results. The product is mixed 3 part foam concentrate to 97 parts water. It may also be used as a 3% pre-mix solution. SOLBERG RE‑HEALING RF3 foam is compatible with most dry powder (chemical) agents.†

† Not an FM Approved Configuration
†† See FM Approval Guide

Fire Performance
SOLBERG RE‑HEALING RF3 foam concentrate has been tested to and meets the fire performance test criteria of Underwriters Laboratories, Inc. (UL) Standard 162, Underwriters’ Laboratories of Canada (ULC) Standard S564, FM Approval Standard 5130, European Standard EN 1568 Part 3 and International Civil Aviation Organization (ICAO) Levels B and C.

SOLBERG RE‑HEALING RF3 foam concentrate can be proportioned at the proper foam solution percentage down to product temperatures of 35°F (1.7°C) using common foam proportioning devices†† such as:
•
Eductors
•
Inline balanced pressure proportioners
•
Ratio controllers
•
Self-educting nozzles

Multiple foam generating equipment is approved or listed for a wide variety of system applications. Equipment including various foam makers and chambers; portable and fixed foam discharge nozzles; foam water sprinklers; and standard sprinklers.

SOLBERG RE‑HEALING RF3 foam concentrate should not be mixed with other foam concentrates. For questions about compatibility or mixing, consult Perimeter Solutions Technical Services.
Materials of Construction Capability
SOLBERG RE‑HEALING RF3 foam concentrate is compatible with multiple materials of construction such as carbon steel, stainless steel, brass, polyethylene and PVC. Galvanized steel should not be used in direct contact with the foam concentrate. For questions about materials of construction compatibility, consult Perimeter Solutions Technical Services.

SOLBERG manufactured products are thoroughly inspected and undergo rigorous quality control tests. These evaluations analyze the foam’s physical parameters as well as the finished product’s fire performance. A Certificate of Analysis (CoA) is issued with every batch.
SOLBERG RE‑HEALING RF3 foam concentrate is:
• Underwriters Laboratories, Inc. Listed in accordance with UL 162 (Standard for Safety for Foam Equipment and Liquid Concentrates)
• Underwriters’ Laboratories of Canada Listed (Standard for Category 1 Foam Liquid Concentrates ULC S564)
• FM Approved per Approval Standard 5130
• European Norm (EN)Standard 1568 Part 3 Approved
• International Civil Aviation Organization (ICAO) Airport Services Manual (DOC 9137-AN/898) Part 1 – Rescue and Firefighting, Levels B and C Certified
• Compliant with Boeing Corrosion Standard BSS 7432
• GreenScreen Certified Silver®