SOLBERG® RE‑HEALING™ RF3x6 ATC foam concentrate from SOLBERG is an
innovative environmentally sustainable fluorosurfactant and fluoropolymer-free
foam concentrate used to effectively extinguish Class B hydrocarbon fuel fires at
3% and polar solvent fuel fires at 6% solution. SOLBERG RE-HEALING RF3x6 ATC
foam can be used in fresh, salt or brackish water. SOLBERG RE-HEALING RF3x6
ATC foam possesses excellent burn back resistance due to its remarkable flow
and rapid resealing characteristics. SOLBERG RE-HEALING foam concentrates are
formulated using a new high performance synthetic foam technology to replace
traditional AFFF, FFFP foam concentrates and older protein and fluoroprotein
foams.

SOLBERG RE-HEALING RF3x6 ATC foam
concentrate is intended for use on Class B
hydrocarbon or polar solvent fuel fires. The
foam can be used to prevent re-ignition of a
liquid spill and control hazardous vapors. On
Class A fuels, SOLBERG RE-HEALING RF3x6
ATC foam will improve extinguishment in
deep-seated fires. Foam discharge devices
such as air aspirating, as well as non-air
aspirating equipment, including standard
sprinkler heads, can be used to obtain
maximum results. The product is mixed 3
parts foam concentrate to 97 parts water
for hydrocarbon fuels or 6 parts foam
concentrate to 94 parts water for polar
solvent fuels. It may also be used as a pre-mix
solution. SOLBERG RE-HEALING RF3x6 ATC
foam is compatible with most dry powder
(chemical) agents

Fire Performance
SOLBERG RE-HEALING RF3x6 ATC foam
concentrate has been tested to and
meets the fire performance test criteria of
European Standard EN 1568 Part 3 & 4 and
International Civil Aviation Organization
(ICAO)

SOLBERG RE-HEALING RF3x6 ATC foam
concentrate can be proportioned at the
proper foam solution percentage using
common foam proportioning devices such
as:
• Eductors
• Inline balanced pressure proportioners
• Ratio controllers
• Self-educting nozzles

SOLBERG RE-HEALING RF3x6 ATC foam concentrate should not be mixed with
other foam concentrates. For questions about compatibility or mixing, consult
Perimeter Solutions Technical Services.
Materials of Construction Capability
SOLBERG RE-HEALING RF3x6 ATC foam concentrate is compatible with multiple
materials of construction such as carbon steel, stainless steel, brass, polyethylene
and PVC. Galvanized steel should not be used in direct contact with the foam
concentrate. For questions about materials of construction compatibility, consult
Perimeter Solutions Technical Services

SOLBERG RE-HEALING foam concentrates do not contain intentionally added PFAS chemicals including PFOA and PFOS.
In making this statement, SOLBERG relies on information provided by its raw material suppliers and certain independent
laboratory analysis conducted on the product.

SOLBERG manufactured products are thoroughly inspected and undergo rigorous quality control tests. These evaluations
analyze the foam’s physical parameters as well as the finished product’s fire performance. A Certificate of Analysis (CoA) is
completed with every batch.
SOLBERG RE-HEALING RF3x6 ATC foam concentrate is Approved to European Standard EN1568 Part 3 & 4 and ICAO