NEXT GENERATION SOLBERG FOAM TECHNOLOGY Solberg is proud to release its next generation of Solberg Foam Technology – the new Solberg RF Series of foam concentrates. The new Solberg RF Series of fire fighting foams use an advanced extinguishing mechanism that is highly effective against even the most difficult flammable challenges. Best of all, the new generation berg F Series of foam concentrates do not contain Fluorosurfactants, Fluoropolymers or Fluorotelomers. New Technology, Traditional Performance RF6 can be applied with all existing equipment. When proportioned at 6% concentration with water of all kinds it has the ability to flow quickly and freely across the surface of hydrocarbon flammable liquid fuel. Fire control and extinguishment is rapid and effective.

RE‑HEALING™ RF6 foam concentrate from SOLBERG® is an innovative
environmentally sustainable fluorosurfactant and fluoropolymer-free foam
concentrate used to effectively extinguish Class B hydrocarbon fuel fires.
Proportioned at 6% solution, SOLBERG RE-HEALING RF6 foam concentrate can be
used in fresh, salt or brackish water. SOLBERG RE-HEALING RF6 foam possesses
excellent burn back resistance due to its remarkable flow and rapid resealing
characteristics. RE-HEALING foam concentrates are formulated using a new high
performance synthetic foam technology to replace traditional AFFF, FFFP foam
concentrates and older protein and fluoroprotein foams.

SOLBERG RE-HEALING RF6 foam
concentrate is intended for use on Class B
hydrocarbon fuel fires. It is not intended for
use on Class B polar solvent fuels. The foam
can be used to prevent re-ignition of a liquid
spill and control hazardous vapors. On Class
A fuels, SOLBERG RE-HEALING RF6 foam
will improve extinguishment in deep-seated
fires. Foam discharge devices such as air
aspirating, as well as, non-air aspirating
equipment, including standard sprinkler
heads, can be used to obtain maximum
results. The product is mixed 6 part foam
concentrate to 94 parts water. It may also
be used as a 6% pre-mix solution. SOLBERG
RE-HEALING RF6 foam is compatible with
most dry powder (chemical) agents.

Fire Performance
SOLBERG RE-HEALING RF6 foam
concentrate has been tested to and meets
the fire performance test criteria of European
Standard EN 1568 Part 3 and International
Civil Aviation Organization (ICAO) Level B.
Foam Proportioning
SOLBERG RE-HEALING RF6 foam
concentrate can be proportioned at the
proper foam solution percentage using
common foam proportioning devices such as:
• Eductors
• Inline balanced pressure proportioners
• Ratio controllers
• Self-educting nozzles

SOLBERG RE-HEALING RF6 foam concentrate should not be mixed with
other foam concentrates. For questions about compatibility or mixing, consult
Perimeter Solutions Technical Services.
Materials of Construction Capability
SOLBERG RE-HEALING RF6 foam concentrate is compatible with multiple
materials of construction such as carbon steel, stainless steel, brass, polyethylene
and PVC. Galvanized steel should not be used in direct contact with the foam
concentrate. For questions about materials of construction compatibility, consult
Perimeter Solutions Technical Services.

SOLBERG RE-HEALING foam concentrates are fluorosurfactant, fluoropolymerfree products for use on Class B hydrocarbon fuels with no environmental
concerns for persistence, bioaccumulation or toxic break down.

SOLBERG manufactured products are thoroughly inspected and undergo rigorous quality control tests. These evaluations
analyze the foam’s physical parameters as well as the finished product’s fire performance. A Certificate of Analysis (CoA) is issued
with every batch.
SOLBERG RE-HEALING RF6 foam concentrate is Approved to European Standard EN 1568 Part 3 and International Civil Aviation
Organization (ICAO) Level B.