X-Series Intrinsically Safe Flashlight – 3 AA – 5418GX

  • cETLus, ATEX, IECEx, and INMETRO-certified Intrinsically Safe for use in both above and below ground hazardous locations where explosive gases and dust may be present
  • CREE® LED technology – 50,000 + hours LED life
  • Momentary or constant-on flashlight
  • Sharp focused flashlight beam for distance illumination
  • Polymer housing
  • Non-slip grip
  • Tail switch
  • Dustproof / Waterproof
  • Impact & chemical resistant
  • Meets Requirements of NFPA-1971-8.6 (2013)
  • Requires 3 AA batteries (not included)
  • Limited Lifetime Warranty



The NSP-2420 X-Series flashlight uses an LED rated at 250 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable flashlight beam rated at 143 meters (469+ feet). Constructed out of durable PC/ABS, this IP-X7 rated waterproof flashlight has a single body switch that provides momentary or constant-on functionality. Power comes from 3 AA batteries (included).

Adaro LED Safety Torch Adalit L-5 Plus


  • Certification: ATEX Zone Intrinsically Safe
  • Enclosed Protection: IP67
  • Batteries: 4 x AAA
  • Lamp Type: White LED
  • Burn Time: 4 hours high / 30 hours low
  • Light Output: 135 lm
  • Weight: L5 – 145grams
  • Light Sensor: Automatic light brightness adjustment


UKE3AA LED Herculite Torch – Tail Switch On/Off Button

  • POWER: 2 Watt
  • BURN TIME: 4-5 hours on high
  • BEAM: 100 metres (328 feet)
  • LAMP: High-Intensity side-emitting LED
  • BATTERY: 4 Alkaline AA
  • SIZE: 170mm (6.7”) L x 40mm (1.6”) W x 35mm (1.4”) D
  • LUMENS: 28 low/77 high
  • CASE: ABS/polycarbonate



  • LED will not break or burn out
  • Innovative power control circuit delivers constant brightness throughout battery life
  • Batteries last 3-4 times longer
  • Push button switch constant/momentary and high/low intensity
  • Ultra high impact abs construction • Easy load battery system
  • Corrosion proof, non-conductive • Mounts to all work helmets
  • Passes 1.8 metre (6 feet) drop test
  • Waterproof to 3 metres
  • Only certified when using Alkaline batteries
  • Intrinsically rated to Class 1 / Division 2


Herculite® Chemically Resistant 4AA eLED

This powerful and
compact light puts out an impressive 180 lumens for 8 hours and is designed
to resist corrosion from many common chemicals.

  • Lightweight and bright in any conditions.
    180 lumens
    8 Hour run time
    waterproof 3 Metres
    Internal protection from dust and liquids

Product Code: UKT514609-7A+

Easi On / Off Torch Holder

The Easi On Off torch holder is a mount system used on Pacific Helmets for the PacFire range of torch products

Product Code: B2066114

Universal Torch Clip – F3 Series, F4 Model, BR and R5 Series

Universal torch holder which is compatible with all of the brimmed Pacific Helmet range and will suit many other styles of helmets.

Product Code: UKT14819

Adaro Torch Clip to suit L5PLUS.S Torch

Adaro Torch Clip to suit L5PLUS.S Torch
Adaro torch clip for Pacific Helmets Easi On-Off Base.


Easi On / Off Clip Multi Complete – all models except BR9 and F9

Easi On / Off Clip Multi Complete – all models except BR9 and F9

Product Code: B2066056


These Dual-Light™ flashlights are cETLus, ATEX, IECEx, MSHA
and INMETRO listed Intrinsically Safe Permissible.

They each use a CREE® LED rated at 120 lumens that works in conjunction with
a high-efficiency deep parabolic reflector to create a usable flashlight beam rated at 170 meters. A 120 lumens unfocused floodlight is integrated into the housing which is perfect for close-up illumination. Additionally both the flashlight and the floodlight can be turned on at the same time for maximum versatility.

The dual body switches provide momentary or constant-on functionality for the flashlight and on/off functionality for the floodlight. Power comes from 3 AA batteries (not included).